Waterproof rigid core vinyl flooring in the daily use process can not be used as marble, tile. If you do not know the floor maintenance knowledge, will cause damage, pollution, and other issues. We should pay attention to the waterproof rigid core vinyl flooring maintenance.

1. Cleaning and maintenance of a floor after laying / before use:

(1)Remove the dust and sundries on the floor surface first.

(2)Wash and dry with water.

2. Daily cleaning and maintenance:

(1)Push dust or vacuum cleaner. (drag the dust traction agent on the ground and push the dust after drying.)

(2)Wet tow. (dilute the floor cleaner with water at a ratio of 1:20 and mop the floor with a semi-wet mop.) If necessary, it can also be used to clean the floor at a low speed.

3. Complete renovation treatment:

(1)Push dust or vacuum cleaner.

(2)Dilute with 1:10 strong dewaxing water and evenly spread it on the ground. Wait for 5-10 minutes. Clean and remove wax at low speed with a floor rubbing machine and red grinding plate. Drain the sewage with a water suction machine in time.

(3)Wash and dry with water until there is no residual detergent left on the floor.

(4)Upper 1-2 layers of high strength surface wax as required.

4. Treatment of special dirt:

(1)Oil stain: for local oil stains, pour the original liquid of water-based oil remover directly on the towel to wipe; for a large area of oil stains, dilute the water-based oil remover at 1:10, and then clean it at low speed with a floor wiping the machine and red grinding plate.

(2)Black offset printing: use spray cleaning and maintenance wax with the high-speed polishing machine and white polishing pad for polishing. For a long time of black offset printing, you can directly pour the strong black offset remover on the towel to wipe.

(3)Glue or gum: pour professional strong degumming agent directly onto the towel to wipe it off.